Paulette brings homemade muffins + banana bread for the volunteer crew!

Paulette, retired Air Canada Stewardess, is welcomed to the Tiger Moth Restoration Team. She helped remove the fabric from the upper left wing on Thursday. With George Inman, Paulette, Rick and Jill working together we were able to remove the fabric and strip off 3 layers of paint on one side of the wing. We'll flip the wing and do the other side today. The trailing edge needs re-alignment and re-gluing. Tom and Steve Phinney will be back shortly to prepare a repair list once we have all the paint removed so they can inspect the wood.

 Removing the fabric wrap on the wing tip bow.

Paulette donated 3 cans of Tough Coat, Penetrating Oil, #400 sanding paper, and more scrapers - plus a fresh loaf of home-made banana brad and muffins.

Preparing Upper Wing for Fabric- George, Al, Peter, Paulette and more Help

Murray Bryson and his good friend, Paulette, dropped by to see how we were making out. Both of their father's had trained in Tiger Moths 70+ years ago in Ontario! Paulette joined the Tiger Moth Restoration Team!

 Al Tring, a member of the CAHS and retired from Standard Aero is a regular member of the Tiger Moth Restoration Team - he meticulously cleaned all the metal fittings and leading edge.

 Al Tring, Jill Oakes, and Rick Riewe masked off the metal pieces and prepared to paint them with green metal primer "Tough Coat" from Goulet Aircraft Supply.

 Maurice April and Rick Riewe removed the masking material after a night of Zumba Dance-Exercising.

 George Inman prepared the new rib caps from Sitka Spruce donated by Jim Goold, Gil Bourrier, and Bill LeBrun. George donated some more of that awesome sanding paper!

 Peter Moodie had an hour to spare so dropped in to help - he cleaned the aileron control cables that had been soaking in varsol. They looked like new after he worked on them. We then soaked them in LPS1 overnight and wiped them with a dry cloth.

 George Inman painted the drag and anti-drag wires on all 3 wings with "Tough Coat" green metal primer.

 Once the paint was dry, George tied on the wire separators with waxed thread and a knot he uses in electrical wiring - it is really tight and impossible to unravel.

Upper Right Tiger Moth Wing

Joyce Stoyka and Rick Riewe removed the fabric from the upper right Tiger Moth wing a couple of weeks ago.

 The serial numbers and identification plates had been covered with masking tape and then painted over top with white paint by previous restorers. The masking tape was carefully removed, the three layers of paint stripped off using a mild stripper "1850" leaving the identification plates in place - Thank you Rick, Al and George! Then the wing was repaired with sitka spruce + T88 glue, and varnished with 2-part epoxy varnish from Goulet Aircraft Supply. Tom & Joyce Stoyka have volunteered to gently sand blast the external fittings and coat them with Tough Coat next week. Thank you Tom and Joyce! Doug Render invented a system for removing paint from curved sections...a spoon ground down to the perfect radius ...thanks to the Lyncrest Flight Centre Community Club for donating the spoons!

 George Inman removing three layers of paint from metal fittings.

 Gil Bourrier noticed the leading edge dropped about 1/8" along the first 3 feet by the root rib.

 Vic Prefontaine used a technique to jig the warped trailing edge back into it's original straight position that he had first used 60 years ago when he was working on the 20' long aileron of a DC3! We stretched a piece of upholstery thread along the edge and clamped the aircraft to upright posts - aligning the trailing edge to the thread.

Rick, Jim Goold, and John Blackner double checking the alignment of the leading and trailing edges. The same jig system used for the trailing edge was also used for the leading edge re-align.

Rib stitching with Henry Riege - Covering Ailerons April 14th

Henry Riege from Oak Hammock Air Park led a rib stitching workshop at the RAA building with about 15 participants. He used the lower right Tiger Moth wing for demonstration and a piece of cardboard substituted for the fabric so we could more easily see the stitching system. Bob Stewart, Gil Bourrier, John, George Inman, and Henry Riege (lft-rht). April 14th we plan on covering the ailerons, drop by if you'd like to help.

 Holes for stitches are pre-punched and aligned so thread between the ribs is vertical.

 Tightening the knot.

 Ben Toenders practising for when we cover the Tiger Moth wings.

 Peter Moodie practising the traditional stitch - the following series shows each of the steps.

H

Lower Left Wing - Pitot Tubing, Prep for Varnish, Visitors

Ted Hector, AME, checking over the ailerons - Gilbert Bourrier re-aligned the trailing edge and all joints were reglued

 Vic Prefontaine (we're working on adding accents - still a mystery on this program!) bending the pitot tubing. The tubing was re-routed straight down the front edge of the front spar to the root spar rather than crossing over mid-wing.

 Root end of lower right leading edge spar.

 Inter-wing strut mount area on leading edge spar of lower right wing.

 Gil  Bourrier is refurbishing the aileron sprocket and chain, which will  be re-inserted in this aileron control box before covering with fabric.

 Alan Tring, Rick Riewe, Paul Dyck and Jill removed excess paint from spars, glued with T88 reinforcement blocks on the wingwalk, re-glued rib ends in aileron well by removing screws, applying glue, countersinking holes and reinserting same screws into glue-filled holes. Gil Bourrier double checked the leading and trailing edges for alignment.

 Lower right wing front spar serial number.

 Alan Tring, CAHS Member, is aiming to fly in 100 different types of airplanes; including this Tiger Moth. Brandon CATP Museum looks forward to making Alan's dream come true and Harvey McKinnon has already taken him flying in the Museum's Harvard! Here Alan is helping mask off the metal pieces =  preping for applying the zinc chromate provided by Goulet Aircraft Supplies.

 Tom and Joyce Stoyka dropped in to see the project after being in Florida for about 4 months.

 Alan Tring and Rick Riewe masking the lower right wing.

 Bill Tweed, Michael Gillespie, and Dale Trueman (lft-rht) studying the serial number on the lower right aileron.

 Rick Riewe spent several 12-hour days doing the finishing touches on preping the lower right wing for zinc chromate (metal) and varnish (wood).

 Bill Tweed, Rick Riewe, Michael Gillespie and Dale Trueman - great stories of building warbird models were inspired by the rib jigs Gil Bourrier made for the Brandon CATP Museum. Ribs will be sold in the museum gift shop to raise funds for museum projects.

V

Tom and Steve Phinney AMOs do PreCover Inspection

 Steve Phinney, AMO, inspecting lower right wing; the ribs were in much better condition than the lower left wing. Almost all ribs had already been re-glued by Brandon RAA & CATP Museum volunteers in 2006-2007.

 Tom Phinney, AMO, inspecting lower right wing - all components were closely inspected following advice from Brandon RAA member, Harold, who worked on the wings in 2006-2007 and gave us advice on condition.

 Lower left wing inspected by Tom Phinney and ready for cover.

 Aileron control cables have a linkage several feet in from the root rib; Tom figures its to eliminate the need for a guide.

 Tom inspecting the lower left aileron - lower right wing and aileron still need varnish - three coats of 2part epoxy varnish used.

Tom inspecting flying wires. They looked in airworthy condition and recommended we take them in to a shop to get coated.

Ste