Maurice did the initial cleaning using green scotchbrite pads.
Then the wires were wiped down and washed with POR15 Cleaning Fluid diluted 5:1. George Inman built a 2x4 trough lined with plastic - Vic's idea! to hold the fluid and the wires. Then the wires were rinsed well using the hose and dried thoroughly. The clean wires were then soaked in the anti-corrosion POR15 solution, kept wet for 20 minutes, rinsed thoroughly with the hose and then dried thoroughly. This was repeated 4 hours later. They are now ready for 2pt epoxy primer and paint.
No comments:
Post a Comment